If you have been looking for a beautiful and finely detailed Whiz fan to begin or add to your collection, you may never fine one of higher quality and detail. This fan is finished in Pullman Green custom mixed to closely match the original GE color. This fan has been totally restored in every detail and is the model with the built-in on/off switch. These fans were produced beginning in 1924 and were one of the most popular GE models because they were very affordable compared to other larger models. This is a single speed model featuring an on/off switch with brass blades. It is very quiet and runs very smooth with nicely balanced blades. This fan has been totally disassembled and all originally painted parts sand blasted clean. These parts were then filed and sanded smooth prior to applying coats of epoxy 2-part automotive primer. Then, after sanding, two coats of 2-part automotive acrylic enamel were applied in Pullman Green. Then two coats of 2-part clear-coat were then applied over the green enamel for additional hardened protection and then rubbed out for a lasting shine. I think the photos show the true color and beauty fairly well. The old wiring has been replaced from head wire to line cord using old style cloth covered wire, soldered and heat shrunk to the stator which has been fully inspected and coated with liquid insulation where needed. Finally, a new antique style plug was installed onto the new cloth style line cord. The switch contact surfaces have been cleaned and adjusted for positive action. New rubber grommets replace all of the old original ones. All of the brass components including screws, oil reservoirs, nameplate and badge have been finely polished with clear coating applied for added protection. The shaft bearings now meet close tolerances to the shaft. The front bearing was re-bushed due to wear to assure and extend operation and reliability. The oil reservoirs have been cleaned with new wicking installed, adjusted and filled with fresh oil to provide positive shaft lubrication. New green worsted wool billiard cloth has been tightly fitted and applied to the base to protect table or furniture surfaces. The brass blades measure 9-inches in diameter and the cage is 10 inches across. The base is 6 inches in diameter and the total height including the cage is approximately 12 inches. Although I use high quality materials, best wiring practices, care and workmanship, I cannot be responsible for the design and safety of these fans, especially guarding, which is inherent in their early designs. Thank you for reviewing my listing and please feel free to contact me if you have any questions or comments about this fan. The item “GE General Electric WHIZ Antique Brass Blades Fan Restored LOOK” is in sale since Saturday, January 28, 2017. This item is in the category “Collectibles\Kitchen & Home\Electric Fans”. The seller is “roadrunner642″ and is located in Saint Peters, Missouri. This item can be shipped worldwide.