“BUILT TO LAST” was the Emerson logo, and last they did. This original Emerson model 29646 was manufactured in the early 1920’s and it is still running strong today – over 90 years later. If SPECIAL and CONFIDENCE are what you are looking for in an antique electric fan restoration, then this is it. I have fan customers that have been running their restored Emerson fans for over ten years. They truly don’t build them like this anymore. The American made Emerson electric fan is probably the best built electric fan ever. This Emerson electric fan is more than just a beautiful restoration – it is an example of those innovative and technological advances right out of the industrial revolution and the coming of the machine age. You are looking at true American history preserved. This fan features 12 inch Parker (unique to Emerson), solid brass blades, adjustable oscillator, and 3 speeds. The four, solid brass “Parker” blades have been roll-formed and matched to improve air flow. They are then stroboscope aligned and dynamically balanced to provide very smooth operation. Finally the blades are machine buffed and clear coated. These precision blade adjustments are another special step in this restoration. Beautiful brass cage badge features the Emerson Pyramid design and “BUILT TO LAST” logo. This is an especially difficult badge to restore and they are seldom seen in this condition. Black background has been restored, embossed brass polished, then an overall clear coat applied for preservation. SPECIAL NOTE: To properly treat and prevent reoccurrence of rust and corrosion between the brass blades and the steel hub, they are disassembled and processed separately. After refinishing, they are reassembled using special solid brass rivets and special tooling. The reassembled blades and hub assembly look and perform like it just came out of the factory. This is a special step in the restoration that is seldom done by other restorers. To do it properly, it is expensive and time consuming. The motor cord and the line cord are matching black, cloth covered cords made especially for antique restorations. These cords are so much closer to the originals. The plug is a vintage style plug that was commonly used on this fan. All electrical is thoroughly inspected and tested with extended trial runs concentrating on current draw and temperatures. Stator winding is cleaned and sealed with an appropriate product. Speed control is completely rebuilt because most of the time the choke coil winding insulation is rotting and pealing off, and the other parts are corroded and rusting. In addition, a new choke coil is rewound to updated specifications making it more compatible with today’s higher line voltages. The fan now operates more like it was originally designed to. The base, motor housing, and gear housing are constructed of rugged cast iron. A sliding switch at the base provides a choice of “off and three different speeds”. Refinishing involved complete disassembly, stripping to bare metal, bead blasting, and then coating with the very best paint system available. The gun applied finish is the same weather proof finish used on automobiles. It consists of a catalyst activated epoxy primer/sealer, a catalyst activated urethane primer/filler, 2 coats of “Deep Black” base-coat, and 2 coats of catalyst activated clear-coat. And it is stunning. All of the many processes used in this restoration are too numerous to mention in this short description. I do all of the work myself. You see my fans from every angle and they look brilliant in the images because they are brilliant. Here we have a view of the oscillator gear housing, oscillator control and motor positioning controls. Oscillation can be adjusted from 0 degrees to 90 degrees. Powerful 4-pole motor smoothly turns these large blades with ease. It runs strong and smooth while only using 35 watts on the LOW setting. Very nice distinctive speed changes at 800 RPM on LOW, 1100 RPM on MEDIUM, and 1500 RPM on HIGH. The patented design of this Emerson motor was not only the best of that era, but is considered the best to date. The rotor of this 1920’s motor actually rides on a shaft that acts as the bearing and is in a constant oil bath. A new leather seal has been installed to ensure that this oil bath chamber does not leak. Oscillator gear housing has been packed with gear lube and is ready for another lifetime of operation. Beautiful solid brass Emerson motor badge provides the specs for this model. Badge black background has been restored, raised brass polished, then clear coated for preservation. Only polished, solid brass rivets are used to anchor the badge. All hardware (screws, etc) has been refinished to original by bluing (a Parkerizing process). Those original blued screws replaced with brass screws will be packaged and included to give the new owner the option of going back all original. Genuine wool blend felt has been chosen for the bottom cover. Its rich, dark green color and smooth, thick texture is so much closer to the factory original. Some assembly will be required. Instructions and tools are included. Special motor lube is also included. This Emerson electric fan has been very carefully, meticulously, and painstakingly restored with total attention to detail and quality. The new owner will be proud to show it and will thoroughly enjoy using it. I have been collecting and restoring electric fans for many years, and I stand behind my work 100%. Packaging is done with new materials and cartons. You WILL need special electrical adapters for use in your country. An image of this fan before restoration began is also available. These original, refinished brass badges are the crowning touch to this restoration. What detailed restoration could be complete without this critical step? The item “ART DECO EMERSON ELECTRIC FAN ANTIQUE ELECTRIC FAN RESTORED” is in sale since Tuesday, November 03, 2015. This item is in the category “Collectibles\Kitchen & Home\Electric Fans”. The seller is “newcity2″ and is located in Fort Smith, Arkansas. This item can be shipped to United States.